Nature-Inspired Surface Engineering for Efficient Atmospheric Water Harvesting.

Atmospheric water harvesting is a sustainable solution to global water shortage, which requires high efficiency, high durability, low cost, and environmentally friendly water collectors. In this paper, we report a novel water collector design based on a nature-inspired hybrid superhydrophilic/superhydrophobic aluminum surface. The surface is fabricated by combining laser and chemical treatments. We achieve a 163° contrast in contact angles between the superhydrophilic pattern and the superhydrophobic background. Such a unique superhydrophilic/superhydrophobic combination presents a self-pumped mechanism, providing the hybrid collector with highly efficient water harvesting performance. Based on simulations and experimental measurements, the water harvesting rate of the repeating units of the pattern was optimized, and the corresponding hybrid collector achieves a water harvesting rate of 0.85 kg m-2 h-1. Additionally, our hybrid collector also exhibits good stability, flexibility, as well as thermal conductivity and hence shows great potential for practical application.

Human blood neutrophils generate ROS through FcγR-signaling to mediate protection against febrile P. falciparum malaria.

Blood phagocytes, such as neutrophils and monocytes, generate reactive oxygen species (ROS) as a part of host defense response against infections. We investigated the mechanism of Fcγ-Receptor (FcγR) mediated ROS production in these cells to understand how they contribute to anti-malarial immunity. Plasmodium falciparum merozoites opsonized with naturally occurring IgG triggered both intracellular and extracellular ROS generation in blood phagocytes, with neutrophils being the main contributors. Using specific inhibitors, we show that both FcγRIIIB and FcγRIIA acted synergistically to induce ROS production in neutrophils, and that NADPH oxidase 2 and the PI3K intracellular signal transduction pathway were involved in this process. High levels of neutrophil ROS were also associated with protection against febrile malaria in two geographically diverse malaria endemic regions from Ghana and India, stressing the importance of the cooperation between anti-malarial IgG and neutrophils in triggering ROS-mediated parasite killing as a mechanism for naturally acquired immunity against malaria.

Controlling basal plane sulfur vacancy in water splitting MoSx/NiF electrocatalysts through electric-field-assisted pulsed laser ablation.

Eco-friendly, efficient, and durable electrocatalysts from earth-abundant materials are crucial for water splitting through hydrogen and oxygen generation. However, available methods to fabricate electrocatalysts are either hazardous and time-consuming or require expensive equipment, hindering the large-scale, eco-friendly production of artificial fuels. Here, we present a rapid, single-step method for producing MoSx/NiF electrocatalysts with controlled sulfur-vacancies via electric-field-assisted pulsed laser ablation (EF-PLA) in liquid and in-situ deposition on nickel foam, enabling efficient water splitting. Electric-field parameters efficiently control S-vacancy active sites in electrocatalysts. Higher electric fields yield a MoSx/NiF electrocatalyst with a larger density of S-vacancy sites, suited for HER due to lower Gibbs free energy for H∗ adsorption, while lower electric fields produce an electrocatalyst with lower S-vacancy sites, better suited for OER, as shown by both experimental and theoretical results. The present work opens a horizon in designing high-efficiency catalysts, for a wide range of chemical reactions.

Cloning and Recombinant Protein Expression in Lactococcus lactis.

The Lactococcus lactis, a Gram-positive bacteria, is an ideal expression host for the overproduction of heterologous proteins in a properly folded and functional form. L. lactis has been identified as an efficient cell factory, generally recognized as safe (GRAS), has a long history of safe use in food production, and is known to have probiotic properties. Key desirable features of L. lactis include the following: (1) rapid growth to high cell densities, not requiring aeration which facilitates large-scale fermentation; (2) its Gram-positive nature precludes the presence of contaminating endotoxins; (3) the capacity to secrete stable recombinant protein into the growth medium with few proteases resulting in a properly folded, full-length protein; and (4) the availability of diverse expression vectors facilitating various cloning options. We have previously described production of several recombinant proteins with varying degrees of predicted structural complexities using the L. lactis pH-dependent P170 promoter. The purpose of this chapter is to provide a detailed protocol for facilitating wider application of L. lactis as a reliable platform for expression of heterologous recombinant proteins in soluble form. Here, we present details of the various steps involved such as cloning of the target gene in appropriate expression plasmid vector, determination of the expression levels of the heterologous protein, and initial purification of the expressed soluble recombinant protein of interest.

SARS-CoV-2 Vaccines: Types, Working Principle, and Its Impact on Thrombosis and Gastrointestinal Disorders.

In the current scenario of the coronavirus pandemic caused by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2), considerable efforts have been made to control the pandemic by the development of a strong immune system through massive vaccination. Just after the discovery of the genetic sequences of SARS-CoV-2, the development of vaccines became the prime focus of scientists around the globe. About 200 SARS-CoV-2 candidate vaccines have already been entered into preclinical and clinical trials. Various traditional and novel approaches are being utilized as a broad range of platforms. Viral vector (replicating and non-replicating), nucleic acid (DNA and RNA), recombinant protein, virus-like particle, peptide, live attenuated virus, an inactivated virus approaches are the prominent attributes of the vaccine development. This review article includes the current knowledge about the platforms used for the development of different vaccines, their working principles, their efficacy, and the impacts of COVID-19 vaccines on thrombosis. We provide a detailed description of the vaccines that are already approved by administrative authorities. Moreover, various strategies utilized in the development of emerging vaccines that are in the trial phases along with their mode of delivery have been discussed along with their effect on thrombosis and gastrointestinal disorders.

Neutrophils dominate in opsonic phagocytosis of P. falciparum blood-stage merozoites and protect against febrile malaria.

Antibody-mediated opsonic phagocytosis (OP) of Plasmodium falciparum blood-stage merozoites has been associated with protection against malaria. However, the precise contribution of different peripheral blood phagocytes in the OP mechanism remains unknown. Here, we developed an in vitro OP assay using peripheral blood leukocytes that allowed us to quantify the contribution of each phagocytic cell type in the OP of merozoites. We found that CD14 + +CD16- monocytes were the dominant phagocytic cells at very low antibody levels and Fc gamma receptor (FcγR) IIA plays a key role. At higher antibody levels however, neutrophils were the main phagocytes in the OP of merozoites with FcγRIIIB acting synergistically with FcγRIIA in the process. We found that OP activity by neutrophils was strongly associated with protection against febrile malaria in longitudinal cohort studies performed in Ghana and India. Our results demonstrate that peripheral blood neutrophils are the main phagocytes of P. falciparum blood-stage merozoites.

Identification of Single-Nucleotide Polymorphisms in the Mitochondrial Genome and Kelch 13 Gene of Plasmodium falciparum in Different Geographical Populations.

The emergence of artemisinin-resistant Plasmodium falciparum parasites in Southeast Asia threatens malaria control and elimination. The interconnectedness of parasite populations may be essential to monitor the spread of resistance. Combining a published barcoding system of geographically restricted single-nucleotide polymorphisms (SNPs), mainly mitochondria of P. falciparum with SNPs in the K13 artemisinin resistance marker, could elucidate the parasite population structure and provide insight regarding the spread of drug resistance. We explored the diversity of mitochondrial SNPs (bp position 611-2825) and identified K13 SNPs from malaria patients in the districts of India (Ranchi), Tanzania (Korogwe), and Senegal (Podor, Richard Toll, Kaolack, and Ndoffane). DNA was amplified using a nested PCR and Sanger-sequenced. Overall, 199 K13 sequences (India: N = 92; Tanzania: N = 48; Senegal: N = 59) and 237 mitochondrial sequences (India: N = 93; Tanzania: N = 48; Senegal: N = 96) were generated. SNPs were identified by comparisons with reference genomes. We detected previously reported geographically restricted mitochondrial SNPs (T2175C and G1367A) as markers for parasites originating from the Indian subcontinent and several geographically unrestricted mitochondrial SNPs. Combining haplotypes with published P. falciparum mitochondrial genome data suggested possible regional differences within India. All three countries had G1692A, but Tanzanian and Senegalese SNPs were well-differentiated. Some mitochondrial SNPs are reported here for the first time. Four nonsynonymous K13 SNPs were detected: K189T (India, Tanzania, Senegal); A175T (Tanzania); and A174V and R255K (Senegal). This study supports the use of mitochondrial SNPs to determine the origin of the parasite and suggests that the P. falciparum populations studied were susceptible to artemisinin during sampling because all K13 SNPs observed were outside the propeller domain for artemisinin resistance.

Significantly enhanced electrocatalytic activity of copper for hydrogen evolution reaction through femtosecond laser blackening.

In this work, we report on the creation of a black copper via femtosecond laser processing and its application as a novel electrode material. We show that the black copper exhibits an excellent electrocatalytic activity for hydrogen evolution reaction (HER) in alkaline solution. The laser processing results in a unique microstructure: microparticles covered by finer nanoparticles on top. Electrochemical measurements demonstrate that the kinetics of the HER is significantly accelerated after bare copper is treated and turned black. At -0.325 V (v.s. RHE) in 1 M KOH aqueous solution, the calculated area-specific charge transfer resistance of the electrode decreases sharply from 159 Ω cm2 for the untreated copper to 1 Ω cm2 for the black copper. The electrochemical surface area of the black copper is measured to be only 2.4 times that of the untreated copper and therefore, the significantly enhanced electrocatalytic activity of the black copper for HER is mostly a result of its unique microstructure that favors the formation and enrichment of protons on the surface of copper. This work provides a new strategy for developing high-efficient electrodes for hydrogen generation.

Phase change material based hot electron photodetection.

We introduce a phase change material (PCM) based metal-dielectric-metal (MDM) cavity of gold (Au)-antimony trisulfide (Sb2S3)-Au as a hot electron photodetector (HEPD). Sb2S3 shows significant contrast in the bandgap (Eg) upon phase transition from the crystalline (Cry) (Eg = 2.01 eV) to the amorphous (Amp) (Eg = 1.72 eV) phase and forms the lowest Schottky barrier with Au in its Amp phase compared to conventional semiconductors such as Si, MoS2, and TiO2. The proposed HEPD is tunable for absorption and responsivity in the spectral range of 720 nm < λ < 1250 nm for the Cry phase and 604 nm < λ < 3542 nm for the Amp phase. The single resonance cavity and thus the sensitivity of the designed HEPD device can be changed to the double resonance cavity via the Cry to Amp phase transition. The maximum predicted responsivities for the single and double cavities are 20 and 24 mA W-1, respectively, at 950 nm and 1050 nm wavelengths which is the highest among all previously proposed planar HEPD devices. An anti-symmetric resonance mode at a higher wavelength is observed in the double cavity with 100% absorption. Owing to a high index of Sb2S3, an ultrathin ∼40 nm (∼λ/15) MDM cavity supports a critical light coupling to achieve high-efficiency HEPDs. Furthermore, a reversible and ultrafast (∼70 ns) Cry to Amp phase transition of Sb2S3 makes it suitable for many tunable photonics applications ranging from the visible to near-infrared region. Finally, we have introduced a novel scheme to switch between the single and double cavity by exploiting a semiconductor to metal phase transition in a PCM called VO2. The integration of VO2 as a coupling medium in the double cavity has increased the responsivity up to 50% upon phase transition to the metal phase. The proposed design can be used in optical filters, optical switches, ultrathin broad or narrow band solar absorbers, and other energy applications such as water splitting.

Phase change material-based nano-cavity as an efficient optical modulator.

Structural phase transition induced by temperature or voltage in phase change materials has been used for many tunable photonic applications. Exploiting reversible and sub-ns fast switching in antimony trisulfide (Sb2S3) from amorphous (Amp) to crystalline (Cry), we introduced a reflection modulator based on metal-dielectric-metal structure. The proposed design exhibits tunable, perfect, and multi-band absorption from visible to the near-infrared region. The reflection response of the system shows >99% absorption of light at normal incidence. The maximum achievable modulation efficiency with a narrow line width is ∼98%. Interestingly, the designed cavity supports critical resonance in an ultrathin (∼λ/15) Sb2S3 film with perfect, broadband, and tunable absorption. Finally, we proposed a novel hybrid cavity design formed of Cry and Amp Sb2S3 thin films side-by-side to realize an optical modulator via relative motion between the incident light beam and cavity. The proposed lithographic free structure can be also used for filtering, optical switching, ultrathin photo-detection, solar energy harvesting, and other energy applications.

Electrode and dielectric layer interface device engineering study using furan flanked diketopyrrolopyrrole-dithienothiophene polymer based organic transistors.

We successfully demonstrated a detailed and systematic enhancement of organic field effect transistors (OFETs) performance using dithienothiophene (DTT) and furan-flanked diketopyrrolopyrrole based donor-acceptor conjugated polymer semiconductor namely PDPPF-DTT as an active semiconductor. The self-assembled monolayers (SAMs) treatments at interface junctions of the semiconductor-dielectric and at the semiconductor-metal electrodes has been implemented using bottom gate bottom contact device geometry. Due to SAM treatment at the interface using tailored approach, the significant reduction of threshold voltage (Vth) from - 15.42 to + 5.74 V has been observed. In addition to tuning effect of Vth, simultaneously charge carrier mobility (µFET) has been also enhanced the from 9.94 × 10-4 cm2/Vs to 0.18 cm2/Vs. In order to calculate the trap density in each OFET device, the hysteresis in transfer characteristics has been studied in detail for bare and SAM treated devices. Higher trap density in Penta-fluoro-benzene-thiol (PFBT) treated OFET devices enhances the gate field, which in turn controls the charge carrier density in the channel, and hence gives lower Vth = + 5.74 V. Also, PFBT treatment enhances the trapped interface electrons, which helps to enhance the mobility in this OFET architecture. The overall effect has led to possibility of reduction in the Vth with simultaneous enhancements of µFET in OFETs, following systematic device engineering methodology.

Multipronged heat-exchanger based on femtosecond laser-nano/microstructured Aluminum for thermoelectric heat scavengers.

Femtosecond (fs) laser processing can significantly alter the optical, thermal, mechanical, and electrical properties of materials. Here, we show that fs-laser processing transforms aluminum (Al) to a highly efficient and multipronged heat exchanger. By optimizing the formed surface nano- and microstructures, we increase the Al emissivity and surface area by 700% and 300%, respectively. Accordingly, we show that fs-laser treated Al (fs-Al) increases the radiative and convective cooling power of fs-Al by 2100% and 300%, respectively, at 200 °C. As a direct application, we use fs-Al as a heat sink for a thermoelectric generator (TEG) and demonstrate a 280% increase in the TEG output power compared to a TEG with an untreated Al heat exchanger at 200 °C. The multipronged enhancement in fs-Al heat exchange properties lead to an increase in the TEG output power over a wide temperature ( T ) range ( T > 50 °C ). Conversely, a simple radiative cooling heat exchanger increases the TEG output power within a limited temperature range ( T > 150 °C ) . We investigate the laser processing parameters necessary to maximize the spectral emissivity and surface area of fs-Al. Fs-Al promises to be a widely used and compact heat exchanger for passive cooling of computers and data centers as well as to increase the efficiency of TEGs incorporated in sensors and handheld electronics.

All-optical logic gates using dielectric-loaded waveguides with quasi-rhombus metasurfaces.

Nanostructure and nanoantenna-based all-optical (AO) devices have attracted significant research interests in recent years due to their small size, high information capacity, ultrafast processing, low power consumption, and overall practicality. Here, in this Letter, we propose a novel metasurface having quasi-rhombus-shaped antennas to modulate optical modes in a dielectric-loaded waveguide for the realization of a complete family of logic gates including NOT, AND, OR, XOR, NAND, NOR, and XNOR. These logic operations are realized using destructive and constructive interferences between the input optical signals. The high contrast ratios of about 33.39, 27.69, and 33.11 dB are achieved for the NAND, NOR, and XNOR logic gates, respectively, with the speed as high as 108 Gb/s.

Boosting Perovskite Photodetector Performance in NIR Using Plasmonic Bowtie Nanoantenna Arrays.

Triple-cation mixed metal halide perovskites are important optoelectronic materials due to their high photon to electron conversion efficiency, low exciton binding energy, and good thermal stability. However, the perovskites have low photon to electron conversion efficiency in near-infrared (NIR) due to their weak intrinsic absorption at longer wavelength, especially near the band edge and over the bandgap wavelength. A plasmonic functionalized perovskite photodetector (PD) is designed and fabricated in this study, in which the perovskite ((Cs0.06 FA0.79 MA0.15 )Pb(I0.85 Br0.15 )3 ) active materials are spin-coated on the surface of Au bowtie nanoantenna (BNA) arrays substrate. Under 785 nm laser illumination, near the bandedge of perovskite, the fabricated BNA-based plasmonic PD exhibits ≈2962% enhancement in the photoresponse over the Si/SiO2 -based normal PD. Moreover, the detectivity of the plasmonic PD has a value of 1.5 × 1012 with external quantum efficiency as high as 188.8%, more than 30 times over the normal PD. The strong boosting in the plasmonic PD performance is attributed to the enhanced electric field around BNA arrays through the coupling of localized surface plasmon resonance. The demonstrated BNA-perovskite design can also be used to enhance performance of other optoelectronic devices, and the concept can be extended to other spectral regions with different active materials.

Creating superhydrophobic and antibacterial surfaces on gold by femtosecond laser pulses.

Femtosecond laser-induced surface structuring is a promising technique for the large-scale formation of nano- and microscale structures that can effectively modify materials' optical, electrical, mechanical, and tribological properties. Here we perform a systematic study on femtosecond laser-induced surface structuring on gold (Au) surface and their effect on both hydrophobicity and bacterial-adhesion properties. We created various structures including subwavelength femtosecond laser-induced periodic surface structures (fs-LIPSSs), fs-LIPSSs covered with nano/microstructures, conic and 1D-rod-like structures ( ≤ 6 µm), and spherical nanostructures with a diameter ≥ 10 nm, by raster scanning the laser beam, at different laser fluences. We show that femtosecond laser processing turns originally hydrophilic Au to a superhydrophobic surface. We determine the optimal conditions for the creation of the different surface structures and explain the mechanism behind the formed structures and show that the laser fluence is the main controlling parameter. We demonstrate the ability of all the formed surface structures to reduce the adhesion of Escherichia coli (E. coli) bacteria and show that fs-LIPSSs enjoys superior antibacterial adhesion properties due to its large-scale surface coverage. Approximately 99.03% of the fs-LIPSSs surface is free from bacterial adhesion. The demonstrated physical inhibition of bacterial colonies and biofilm formation without antibiotics is a crucial step towards reducing antimicrobial-resistant infections.

Spectral absorption control of femtosecond laser-treated metals and application in solar-thermal devices.

Direct femtosecond (fs) laser processing is a maskless fabrication technique that can effectively modify the optical, electrical, mechanical, and tribological properties of materials for a wide range of potential applications. However, the eventual implementation of fs-laser-treated surfaces in actual devices remains challenging because it is difficult to precisely control the surface properties. Previous studies of the morphological control of fs-laser-processed surfaces mostly focused on enhancing the uniformity of periodic microstructures. Here, guided by the plasmon hybridisation model, we control the morphology of surface nanostructures to obtain more control over spectral light absorption. We experimentally demonstrate spectral control of a variety of metals [copper (Cu), aluminium (Al), steel and tungsten (W)], resulting in the creation of broadband light absorbers and selective solar absorbers (SSAs). For the first time, we demonstrate that fs-laser-produced surfaces can be used as high-temperature SSAs. We show that a tungsten selective solar absorber (W-SSA) exhibits excellent performance as a high-temperature solar receiver. When integrated into a solar thermoelectric generation (TEG) device, W-SSA provides a 130% increase in solar TEG efficiency compared to untreated W, which is commonly used as an intrinsic selective light absorber.

Peripheral Merozoite Surface Proteins Are Targets of Naturally Acquired Immunity against Malaria in both India and Ghana.

Development of a successful blood-stage vaccine against Plasmodium falciparum malaria remains a high priority. Immune-epidemiological studies are effective tools for the identification of antigenic targets of naturally acquired immunity (NAI) against malaria. However, differences in study design and methodology may compromise interstudy comparisons. Here, we assessed antibody responses against intact merozoites and a panel of 24 recombinant merozoite antigens in longitudinal cohort studies of Ghanaian (n = 115) and Indian (n = 121) populations using the same reagents and statistical methods. Anti-merozoite antibodies were associated with NAI in both the Indian (hazard ratio [HR] = 0.41, P = 0.020) and the Ghanaian (HR = 0.17, P < 0.001) participants. Of the 24 antigen-specific antibodies quantified, 12 and 8 were found to be protective in India and Ghana, respectively. Using least absolute shrinkage and selection operator (LASSO) regression, a powerful variable subselection technique, we identified subsets of four (MSP6, MSP3.7, MSPDBL2, and Pf12) and five (cMSP33D7, MSP3.3, MSPDBL1, GLURP-R2, and RALP-1) antigens that explained NAI better than the individual antibodies in India (HR = 0.18, P < 0.001) and Ghana (HR = 0.31, P < 0.001), respectively. IgG1 and/or IgG3 subclasses against five antigens from these subsets were associated with protection. Through this comparative study, maintaining uniformity of reagents and methodology, we demonstrate that NAI across diverse geographic regions may result from antibodies to multiple antigenic targets that constitute the peripheral merozoite surface protein complexes.

Comparative study of femtosecond laser-induced structural colorization in water and air.

The study of femtosecond laser structural coloring has recently attracted a great amount of research interest. These studies, however, have only been carried out in air. At the same time, laser ablation has also been actively studied in liquids as they provide a unique environment for material processing. However, surprisingly, structural coloring has never been performed in liquids. In this work, we perform the first study of metal structural coloring in liquid and compare the results to metal structural coloring in air. Colors created in liquid are formed by nanoparticle-induced plasmonic absorption and result in a range of colors transitioning from purple to orange. Surface structures formed in liquid are less hierarchical and more uniform than those formed in air, producing a surface with a much higher reflectance due to reduced light trapping, resulting in a more vibrant color. However, colorization formed in water suffers from less uniform colorization due to turbulence at the air-water and water-target interfaces, resulting in slight changes to the laser beam's focus during processing. Finally, finite-difference-time-domain simulation based on the measured surface structures is used to understand the role of plasmonic resonance in colorization.